General Chemical Industry
Technology Overview: SafeGuard™ H2O In-situ Reagent Generation
SafeGuard™ H2O is an advanced on-site, on-demand, automated non-toxic reagent generation system that is advancing the treatment of inorganic and trace metal contaminants and supporting carbon reduction targets by replacing the need to deliver and handle toxic bulk chemicals to treatment plants. The technology helps to remove a wide range of heavy metals and nutrients from water and wastewater as well as inhibit lead, copper and iron corrosion in water transport systems. The novel in-situ process produces reagents at a cost demonstrated to be significantly below that of the same reagents delivered in bulk form. On-site reagent generation is an affordable, non-hazardous and environmentally sustainable solution — providing a 60% cost savings and a rapid return on investment.
View ResourceMonitoring Real-time Ammonia/Ammonium Levels in Brine in the Chlor-alkali Industry
The online Instran™ analyzer is integral to maintaining safety in the chlor-alkali process. Instran™ is effective at measuring ammonia and ammonium in brines above 80 g/L; it ensures plant optimization by allowing real-time and accurate monitoring, despite the difficulties presented by a high concentration of NaCl in the sample.
View ResourceReal-time Fluoride Measurement in Petrochemical Industry
British Petroleum (BP) replaced one of its existing Tytronics online fluoride analyzers at the Castellón refinery in Spain with the online Instran™ Fluoride analyzer. Monitoring fluoride levels in real-time with a reliable and accurate online water quality analyzer is integral to maintaining safety of the alkylation zone and overall refinery. Since its installation in January 2022, the Instran analyzer has been operating continuously and has met the facility’s needs to monitor fluoride levels in real-time within the alkylation zone.
View ResourceWhen Contamination Comes a Knockin’ — SafeGuard™ H2O to the Rescue
In the fight to keep water safe and affordable, there is only one technology for the job! SafeGuard™ H2O is a fully automated, on-demand, in-situ generator of stannous (reducing agent) and tin dioxide (adsorbent), coupled with online monitoring capability. SafeGuard H2O removes As, Cr(VI), Cu, Fe, Pb, and Mn from drinking water and As, Cr(VI), Hg & Se from wastewater; acts as corrosion inhibitor for lead pipes and cooling systems; adsorbs SO2, H2S from industrial emissions. Tin and electricity are the only consumables. There are no similar technologies to SafeGuard H2O that integrate a low life-time cost contaminant treatment system with real-time performance controls. With SafeGuard H2O, contaminants have met their match!
View ResourceAMS Annual Service Contracts (ASC)
The data from AMS online analyzers fulfill mission-critical functions of process control, risk management and contract compliance for its clients. With this in mind, AMS after-sales service support aims to maximize the uptime and minimize time to repair its analyzers. Every AMS system is offered with an annual service contract (ASC).
View ResourceIntelligent Water Treatment Systems
Intelligent water treatment systems incorporate real-time sensing to ensure that their performance is optimized to avoid under- or over-treatment and that any deterioration in system performance is signaled to permit timely remedial intervention.
View ResourceSafeGuard™ Automated Trace Metals Analyzer
SafeGuard™ is an automated trace metals analyzer for monitoring municipal and industrial water and wastewater. The system provides real-time, multi-stream analysis for a range of trace metal contaminants. SafeGuard delivers accurate and reliable results (up to 1 ppb or ± 15%, whichever is higher) with a typical measurement time of fewer than 30 minutes.
View ResourceMetalGuard™ Online Trace Metals Analyzer
MetalGuard™ is the first fully automated, online multi-stream analyzer for monitoring trace metal contaminants such as arsenic, chromium-6, selenium and more. The online analyzer provides high frequency real-time data on trace metals contaminant levels in less than one hour with sensitivity down to 1 ppb.
View ResourceMetalGuard™ Online Arsenic Analyzer
MetalGuard™ Arsenic is the first fully automated, online arsenic analyzer for monitoring drinking water arsenic levels. The online analyzer provides high frequency real-time data on arsenic contaminant levels in thirty minutes with sensitivity down to 1 ppb.
View ResourceAMS Introduces Reliable Trace Metals Analysis In 5 Minutes
Aqua Metrology Systems has introduced an innovative and proprietary analytical method on their SafeGuard™ system that provides measurements of trace metals in 5 minutes without compromising accuracy levels.
View Resource