SafeGuard™ H2O is an advanced on-site, on-demand, automated non-toxic reagent generation system that is advancing the treatment of inorganic and trace metal contaminants and supporting carbon reduction targets by replacing the need to deliver and handle toxic bulk chemicals to treatment plants. The technology helps to remove a wide range of heavy metals and nutrients from water and wastewater as well as inhibit lead, copper and iron corrosion in water transport systems. The novel in-situ process produces reagents at a cost demonstrated to be significantly below that of the same reagents delivered in bulk form. On-site reagent generation is an affordable, non-hazardous and environmentally sustainable solution — providing a 60% cost savings and a rapid return on investment.View Resource
MetalGuard™ is the first fully automated online trace metals analyzer for monitoring municipal and industrial water and wastewater. The system provides real-time, multi-stream analysis for a range of trace metal contaminants.
MetalGuard delivers accurate and reliable results (up to 1 ppb or ± 15%, whichever is higher) with a typical measurement time of fewer than 30 minutes. The system also allows for manually collected samples to be analyzed.
MetalGuard™ Lead Alert!™
A novel automated and unattended real-time lead corrosion risk management system for monitoring the risk of exposure to lead contamination.
The analyzer provides rapid analysis of the safety of drinking water in homes, schools, day-cares exposed to the risk of lead contamination. It is designed to be used independently or in conjunction with SafeGuard™ Lead for rapid low-cost analysis of locations predicted to be at risk for an increase in contamination risk.
AMS Sr. Product Manager, Vladimir Dozortsev, Ph.D., offers a quick preview of the innovative SafeGuard™ H2O in-situ reagent generation system undergoing testing for NSF/ANSI 61 Standard. A 10 gpm SafeGuard H2O stannous generation system was used in the test. The fully automated system generates a reagent on demand, providing economical and reliable treatment of a wide range of contaminants for small and large water systems.View Resource
Communities across the world are plagued by lead contamination and corrosion concerns, which often come to light during testing of children’s blood and after the event has occurred. AMS has developed advanced solutions for lead corrosion risk management and control. AMS’ online lead corrosion monitoring technologies are backed by actionable, high-frequency data, providing a comprehensive risk map that informs public health authorities, water treatment plant operators and consumers. AMS’ intelligent in-situ corrosion inhibitor generation and delivery technology offers a localized treatment solution that displaces orthophosphates and provides a responsive, point-of-care, effective approach to manage the multi-variant challenge of lead corrosion risk.View Resource
MetalGuard™ is a fully automated online trace metals analyzer for monitoring municipal and industrial water and wastewater. This intelligent system serves as an essential element to ensure regulatory compliance and process control. MetalGuard provides real-time, multi-stream analysis for a range of trace metal contaminants; delivering accurate and reliable results in less than 30 minutes.View Resource
Southsea STS, a U.K.-based technical services company specializing in water quality, has a history of embracing and implementing new technologies and ideas to support compliance and control in buildings. Recently, Southsea has been evaluating new technologies for corrosion management as part of a pilot program with the Institution of Civil Engineers (ICE) in the UK. Richard Lawson, Director for Southsea STS, gives a behind the scenes look of the pilot project on the use of AMS’ SafeGuard™ H2O stannous generator to provide corrosion inhibition water treatment for closed-loop heating and cooling systems. Current corrosion inhibitors are relatively expensive, potentially toxic to handle, and can have difficulty meeting requirements imposed for disposal. The SafeGuard™ H2O stannous-based solution can help organizations better manage corrosion and ensure compliance.View Resource
Many industries, hospitals, institutions, and buildings are faced with the inevitable task of managing corrosion and biofilm in their cooling and heating systems. With the SafeGuard™ H2O intelligent corrosion management system these facilities can extend their useful life, reduce maintenance expenditures and foster sustainability. SafeGuard H2O is an innovative electrochemical water treatment solution developed by AMS. A non-toxic and environmentally safe stannous reagent is generated on-site using only tin and electricity and is delivered in a tightly controlled dose. This all-in-one reagent acts as both a biocide and a corrosion inhibitor. The fully integrated and online SafeGuard H2O treatment approach eliminates the pitfalls of conventional corrosion and biofilm management systems and aids in the delivery of an affordable and reliable process.View Resource
In this episode of AMS Talks, Rick Bacon, CEO of Aqua Metrology Systems, and Richard Lawson, Director of Southsea STS, discuss the “Value of Data for Corrosion Control.” Lawson addresses the challenges associated with managing corrosion in buildings and the value of data-driven solutions to better manage and control these water systems and ensure compliance.View Resource
In the fight to keep water safe and affordable, there is only one technology for the job! SafeGuard™ H2O is a fully automated, on-demand, in-situ generator of stannous (reducing agent) and tin dioxide (adsorbent), coupled with online monitoring capability. SafeGuard H2O removes As, Cr(VI), Cu, Fe, Pb, and Mn from drinking water and As, Cr(VI), Hg & Se from wastewater; acts as corrosion inhibitor for lead pipes and cooling systems; adsorbs SO2, H2S from industrial emissions. Tin and electricity are the only consumables. There are no similar technologies to SafeGuard H2O that integrate a low life-time cost contaminant treatment system with real-time performance controls. With SafeGuard H2O, contaminants have met their match!View Resource
Semiconductor manufacturing is not only highly dependent on large volumes of water that must be treated to ultrapure standards, but the process also generates significant volumes of wastewater that contains heavy metals and toxic solvents. To reduce its environmental impact, the semiconductor industry is actively searching for new ways to optimize water consumption and improve the quality of wastewater effluent. AMS offers innovative online real-time, continuous trace metals monitoring solutions designed to aid the semiconductor industry in optimizing water consumption, improving the quality of wastewater effluent and reducing its environmental impact.View Resource