Case Study
Read the case study.
Arizona Facility Uses Ammonia-Laden Centrate for THM Control
The Pima County Regional Wastewater Reclamation Department is using the THM-100™ to optimize its chlorine injection process. The Tres Rios Water Reclamation Facility is using ammonia-laden centrate for THM control. The THM-100 monitor enables the facility to optimize its chlorine injection process and minimize the formation of THMs in its effluent water by providing the operational staff with immediate and accurate daily reports on THM levels. The complete article as published in the September 2015 issue of Water & Wastes Digest can be read here.
View ResourceEffective THM Monitoring for Stage 2 DBPR Compliance in Benicia, California
The integration of the online THM analyzer at Benicia WTP has become an essential element to avert regulatory breaches and deliver treated water of the highest quality to the city of Benicia. Read a version of this case study published in Water & Wastes Digest.
SafeGuard™
SafeGuard™ is an automated online trace metals analyzer for monitoring municipal and industrial water and wastewater. The system provides real-time, multi-stream analysis for a range of trace metal contaminants.
SafeGuard delivers accurate and reliable results (up to 1 ppb or ± 15%, whichever is higher) with a typical measurement time of fewer than 30 minutes. An enhanced system is available with a fast turn around time of 5 minutes without compromising accuracy. The analyzer can be used to measure up to two different trace metals contaminants on the same instrument.
Online THM monitoring helps achieve DBP compliance
A THM-100 analyzer was installed to monitor the THM levels of the incoming water from the Middlesex Water Co. as well as the THM levels of the water leaving the tank.
View Resource
Trace Metals
Contaminants such Arsenic, Chromium-6, Lead, and Selenium have come under increased regulatory pressure due to their impact on public health and the environment. The ability to obtain high frequency data and adjust contaminant remediation processes in real‐time to mitigate the impact of trace metals is only made possible through the use of the online MetalGuard™ and SafeGuard™ analyzers.
Enabling THM Control at the Badger Filtration Plant Using the THM-100 Analyzer
To read the complete article visit the website
View ResourceDisinfection By-products
Reliable data on THM and THM Formation Potential concentrations is required to mitigate the presence of harmful DBPs and monitor the success of THM remediation processes. Accurate and real‐time data on THM concentrations is only possible with the online THM‐100™ analyzer.