AMS

The fully automated SafeGuard™ H2O technology produces a non-toxic stannous reagent onsite and on demand using an in-situ electrolytic generator and a certified precursor. As a cost-effective and efficient solution for municipal and industrial users, SafeGuard™ H2O removes Cr(VI), Fe, H2S, Hg, Pb, and Se from water and wastewater. It also acts as an antibiofilm, antimicrobial reagent for produced water, and as a corrosion inhibitor in distribution networks and cooling systems.

SafeGuard™ H2O is a proven solution for utilities looking to reduce GHG emissions and remove hydrogen sulfide (H2S) to non-detect levels while lowering the cost of treatment (energy and operation). SafeGuard™ H2O can be powered by renewable energy, and tin sulfide, a valuable resource to multiple industries, can be recovered from the process. As a low-carbon approach to H2S removal, SafeGuard™ H2O has achieved 100% removal of H2S from reverse osmosis treated water and raw water supplies.

Read the brochure.

MetalGuard™ Iron is the first fully automated, online iron analyzer that provides dependable real-time data on dissolved, organic and total iron levels to support the delivery of safe drinking water and monitor corrosion in water transport systems. With reliable, continuous, high-frequency data on influent and effluent iron levels, MetalGuard™ Iron aids in the control and optimization of water treatment and iron contamination removal processes.

SafeGuard™ H2O is a fully automated in-situ ferrous/ferric generation system that provides utilities, large to small, with an affordable, non-hazardous and environmentally sustainable solution for phosphate removal. On-site reagent generation delivers 60% cost savings and rapid ROI. This novel technology, poised to displace toxic bulk chemicals, uses a certified iron precursor and an in-situ electrolytic generator to create a ferrous/ferric reagent onsite and on demand. The SafeGuard H2O process is simple, effective and sustainable.

The Instran™ nitrate analyzer provides rapid, real-time, multi-stream reliable analysis of nitrate in both drinking water and wastewater treatment plants. The online analyzer provides high frequency data on nitrate levels in nine minutes with sensitivity down to 0.01 ppm.

The Instran™ free ammonia analyzer provides rapid, real-time, multi-stream reliable analysis of free ammonia in both drinking water and wastewater treatment plants. The online analyzer provides high frequency data on free ammonia levels in nine minutes with sensitivity down to 0.01 ppm.

The data from AMS online analyzers fulfill mission-critical functions of process control, risk management and contract compliance for its clients. With this in mind, AMS after-sales service support aims to maximize the uptime and minimize time to repair its analyzers.  Every AMS system is offered with an annual service contract (ASC).

SafeGuard™ is an automated trace metals analyzer for monitoring municipal and industrial water and wastewater. The system provides real-time, multi-stream analysis for a range of trace metal contaminants. SafeGuard delivers accurate and reliable results (up to 1 ppb or ± 15%, whichever is higher) with a typical measurement time of fewer than 30 minutes.

MetalGuard™ is the first fully automated, online multi-stream analyzer for monitoring trace metal contaminants such as arsenic, chromium-6, selenium and more. The online analyzer provides high frequency real-time data on trace metals contaminant levels in less than one hour with sensitivity down to 1 ppb.