AMS

Aqua Metrology Systems

Product Type

Inorganics

High frequency, real-time data on contaminants such ammonia, fluoride, nitrate, phosphate and more from the online Instran™ inorganic water quality analyzers support sustainable, accurate control of drinking water and wastewater treatment processes.  

Instran™

Instran™ online inorganic water quality analyzers from AMS provide accurate, rapid, real-time, reliable and multi-stream analysis of inorganic contaminants such as ammonia, fluoride, phosphate and nitrate. Instran provides high frequency real-time data with a sensitivity of 10 ppb or 0.01 mg/L and a measurement time of approximately 10 minutes to support sustainable, accurate control of the drinking water and wastewater treatment processes.

MetalGuard™

MetalGuard™ is the first fully automated online trace metals analyzer for monitoring municipal and industrial water and wastewater. The system provides real-time, multi-stream analysis for a range of trace metal contaminants.

MetalGuard delivers accurate and reliable results (up to 1 ppb or ± 15%, whichever is higher) with a typical measurement time of fewer than 30 minutes. The system also allows for manually collected samples to be analyzed.

MetalGuard™ Lead Alert!™

A novel automated and unattended real-time lead corrosion risk management system for monitoring the risk of exposure to lead contamination.

The analyzer provides rapid analysis of the safety of drinking water in homes, schools, day-cares exposed to the risk of lead contamination. It is designed to be used independently or in conjunction with SafeGuard™ Lead for rapid low-cost analysis of locations predicted to be  at risk for an increase in contamination risk.

SafeGuard™

SafeGuard™ is an automated online trace metals analyzer for monitoring municipal and industrial water and wastewater. The system provides real-time, multi-stream analysis for a range of trace metal contaminants.

SafeGuard delivers accurate and reliable results (up to 1 ppb or ± 15%, whichever is higher) with a typical measurement time of fewer than 30 minutes. An enhanced system is available with a fast turn around time of 5 minutes without compromising accuracy. The analyzer can be used to measure up to two different trace metals contaminants on the same instrument.

Trace Metals

Contaminants such Arsenic, Chromium-6, Lead, and Selenium have come under increased regulatory pressure due to their impact on public health and the environment. The ability to obtain high frequency data and adjust contaminant remediation processes in real‐time to mitigate the impact of trace metals is only made possible through the use of the online MetalGuard™ and SafeGuard™ analyzers.

Disinfection By-products

Reliable data on THM and THM Formation Potential concentrations is required to mitigate the presence of harmful DBPs and monitor the success of THM remediation processes. Accurate and real­‐time data on THM concentrations is only possible with the online THM‐100™ analyzer.